Double Headed Metal Nibbler

432 reviews for Double Headed Metal Nibbler

1. Lilly-Ann

   Rated 5 out of 5

   This tool is very nice,does exactly what it says it will do. I have used it on several metals now with good results. There is one thing you need to kn...More

   This tool is very nice,does exactly what it says it will do. I have used it on several metals now with good results. There is one thing you need to know BEFORE you begin cutting. You need to think about where those chips are going to go and make a plan for how to keep them off of you. This thing makes a million little metal chips and they will cut you to ribbons so cover yourself accordingly and DO NOT 'brush' the chips from any surface with your bare hands or skin.
   Andreas

   Rated 5 out of 5

   This sheet metal cutter was very easy to use, it was fast and effective and cutting. The step down drill bit worked fine to establish then right size ...More

   This sheet metal cutter was very easy to use, it was fast and effective and cutting. The step down drill bit worked fine to establish then right size hole, so it's nice that came in the box. Works fine with 20volt drill but I'd recommend using a corded drill for big projects. Not sure how long the cutting bar last but at least an extra was included along with the bit attachment. Overall an affordable tool that saves alot of time.
   Tessa Rivas

   Rated 5 out of 5

   This thing is flat out amazing and worth every penny. I cut a fuel door on my camaro to change the pump and it cut perfectly smooth edges and doesnt d...More

   This thing is flat out amazing and worth every penny. I cut a fuel door on my camaro to change the pump and it cut perfectly smooth edges and doesnt damage any surface underneath
   Mcdowell

   Rated 5 out of 5

   least expensive way to get into using a nibbler. I looked at one even that makita makes that costs around 5-600 dollars and will do 10 gauge and other...More

   least expensive way to get into using a nibbler. I looked at one even that makita makes that costs around 5-600 dollars and will do 10 gauge and others but the idea of a dedicated power source kind of puts the nibbler out of the budget of a lot of people. I was look at the ones like this that use your own drill to power it and it came back to replacement parts. This kit actually gives you three head and the nibbling shafts as well. It worked like a charm. I need to cut into the bed of my 1973 ford truck and it just ate that truck bed up. Very nice cutting edges as well.
   Liyah Mcneil

   Rated 5 out of 5

   This takes getting use to. It cuts not like your typical jig saw. It's smoother and glides smoothly so you can loose control if you don't go slow. It ...More

   This takes getting use to. It cuts not like your typical jig saw. It's smoother and glides smoothly so you can loose control if you don't go slow. It cuts effortlessly. Unless your typical saw, the cuts are wider about 3/16 so you have to take that in consideration. I found that out when I made my cut. They don't tell you that on the videos. Much easier than snippers.
   Piers Coffey

   Rated 5 out of 5

   I needed to cut a rectangular opening in a sheet metal wall panel in order to reroute an external mail slot into the house. Since the sheet metal was ...More

   I needed to cut a rectangular opening in a sheet metal wall panel in order to reroute an external mail slot into the house. Since the sheet metal was covered with drywall, I didn’t have much room to work with so I purchased the nibbler. To use the tool properly, I also purchased an inexpensive 3000 rpm corded drill. The Nibbler was pretty intuitive and easy to use and made short work of the sheet metal. All in all, the tool did the job at a reasonable price.