Color *
Double PCB R
Single PCB BU
Single PCB GR
Double PCB BU
Double PCB GR
Single PCB Y
Double PCB Y
customers are viewing this product



itroobd2 increase the performance of your car, Ecoobd2 Reducing Fuel Consumption for the Economy And Lower Emission.






3. - Up to 35% more power 

    - Up to 25 % more torque

    - Up to 15% fuel saving




NitroOBD2/EcoOBD2: More Power / More Torque  


NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of the engine. 


NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all cars from the year 1996. 


It works based on OBD2 protocols as remapping the Car's computer ECU. After driving 200 km road total,


NitroOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remapping the ECU to increase the performance of the engine.



What does NitroOBD2/EcoOBD2 Make?  


According to your driving habits,  NitroOBD2 makes a new map in the car's computer ECU to increase the performance of your car. 


As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.


What is NitroOBD2/EcoOBD2 Chip Tuning Box?


NitroOBD2 is a Chip Tuning Box that can be plugged into the OBD2 connector of your car to increase performance of your car. 


When it’s plugged into the OBD2 connector, NitroOBD2 receives the information from the car’s computer ECU. With the received data from ECU, 


NitroOBD2 adjusts the boost pressure, the quantity of fuel, injection timing, and pressure to increase the performance of your car. 


NitroOBD2 Chip Tuning Box does not exceed the manufacturer’s requirements. It works only within the tolerance of the engine. 


NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car’s computer ECU or not cause any negative 


effects to the car factory setting. 


NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just


unplug NitroOBD2 from the OBD2 connector.

NitroOBD2 finds out the hidden power of your car.  

- Up to 35% more power 

- Up to 25 % more torque

EcoOBD2 finds out the hidden power of your car.

-Up to 15% fuel saving


NitroOBD2/EcoOBD2 Is Very Easy to Use.   

Plug NitroOBD2 into the OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. 

NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles of driving, and then NitroOBD2 adjusts itself to match your car perfectly.

NitroOBD2 works on the basis of changing the signal from ECU. As a consequence, it changes the whole injection map. 

The main difference between NitroOBD2 Chip Tuning Box and the Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is a cheap and safe type of tuning. 

Remapping is a permanent change to your car. This is an expensive tuning and you cannot remove it. 

NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine. 

NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality. 

Installation and Calibration    

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2

3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)

4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec.
(EcoOBD2 will communicate and establish a connection with ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.Each device available for LPG.


Does your car have an OBD2 connector?   

On-Board Diagnostics or "OBD" is a computer-based system built into MOST 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. 

OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.


Packing List    

- EcoOBD2 Chip Tuning Box Interface

- User Manuel English


Fuel Save  Nitro for Benzine Petrol Gasoline Cars Eco Diesel Nitro Chip Tuning Box Plug Driver chip tuning chip 
 Fuel Save  Nitro for Benzine Petrol Gasoline Cars Eco Diesel Nitro Chip Tuning Box Plug Driver chip tuning chip 

Unhappy with your product? We'll take it back!

We truly believe all our products are of high quality and have confidence that you are 100% SATISFIED with everything you buy from us. Customer satisfaction is our top priority.

However, if you don't have a positive experience for any reason, just let us know and we'll make things right by offering you a replacement or refund within 30 days of delivery. We want you to realize that buying from us is 100% RISK-FREE with our 30 DAY MONEY-BACK GUARANTEE.

Ordering from us is 100% SAFE AND SECURE. All transactions on our website are SSL encrypted and your personal details are never shared, sold or rented to anyone either.

If you need any assistance, please feel free to contact us here. We'll be glad to help you out.

Orders are usually shipped within 2 to 4 business days.

After dispatch, please allow 7 to 12 business days for your product(s) to arrive. However, the delivery may take a little longer than usual due to holidays.

A tracking number will be provided for every order so you can monitor the movement of your parcel.

We provide FREE Shipping on all orders over £75.00 GBP. For orders below £75.00 GBP, a flat rate of £1.95 GBP plus £2 GBP per item in your cart will be charged.

You have successfully subscribed!